For those looking at options for car detailing in Sri Lanka, did you know that you can do a very good DIY job? Unless you drive a significant amount, a thorough detailing job every six to eight-month should be enough. The first time you do a DIY interior cleanup of your vehicle will be long, especially if you haven’t cleaned it for a while. However, if you continue to detail your car at regular intervals, you can easily maintain the look of your vehicle for years.

First, let’s take a look at some of the materials and products you’ll need for detailing your vehicle:

  • Wiping and polishing materials

For serious detailing work, you’ll need a wide variety of towels and rags, from terry cloth towels for scrubbing to lint-free, fine cloth rags for cleaning and polishing. For a glossy shine on surfaces without the scratches, a microfibre cloth will do the trick. Remember, to make sure that the cloths are free of any residual chemicals before you start.

  • Brushes and applicators

You’ll need different sized brushes for cleaning dust from the air vents and other hard-to-reach spots. Depending on the cleaner you’re using, you may need a stiff-bristled brush, rag or sponge. See the instructions on the label of the cleaning product you’re using to make sure you have the proper applicator because it can make all the difference.

Now, let’s take a look at how to detail your vehicle effectively:

Windows and Mirrors

A good glass cleaner and a microfiber cloth can do wonders when cleaning glass surfaces. However, make sure that you’re cleaning glass and not plastic. For instance, gauge covers on the front console are usually made of plastic and for this, you can use an all-purpose cleaner.

Be extra cautious when cleaning tinted windows. Some tinting is a part of the window itself while others actually have a tinted sheet applied to the inside of the window. These can easily be damaged by cleaning products, especially those that contain ammonia.

When cleaning your vehicle windows and mirrors, always spray the cleaner on the cloth to reduce streaking as opposed to the glass itself. Doing so will also help avoid getting the cleaning product on other parts of the vehicle that may get damaged by the chemicals. Lastly, roll down the windows partly to get to that line of grime along the top quarter-inch. Many people completely forget to clean this but if you’re detailing like a pro, you cannot overlook any detail so give it a good wipe too.

If you’re dealing with streaks, it can get frustrating to figure out if the streak are on the interior or exterior surface of the glass. For this, make sure you wipe exterior glass surfaces horizontally while wiping interior glass surfaces vertically. This way you can always know which side the streak is actually on.

Front Panel

The front panel is the area that gets noticed the most. Unfortunately, with all the switches, knobs, vents and other nooks and crannies, it can be very difficult to clean and dust, but not if you have the right tools.

The Dashboard

Whether your dashboard is made of vinyl, leather or some other kind of material, it can be one of the toughest parts of a vehicle’s interior to clean. The angle of the windshield in some vehicles can create hard-to-reach parts on the dashboard and these areas tend to be the dustiest parts of the interior.

Start by vacuuming all the dust properly before you apply a cleaning product, making sure you reach as far as you can during the vacuuming process. After that’s done, you may want to apply an interior dressing appropriate for the material to keep it from fading or cracking from exposure to sunlight.

The Console

The countless buttons and controls in your vehicle can be maddening to clean because dust can get into every crack and crevice. But there is a simple trick to fix this dilemma. To clean the tightest spots and crevices, just wrap a cloth around the tip of a flat-head screwdriver. Make sure to use the thinnest cloth possible so as not to make the head of the screwdriver too bulky to do the job. If you’re worried that a metal screwdriver can damage the console, simply use a plastic knife wrapped in a cloth of cotton swabs instead.

Air Vents

Air vent grills may not be very difficult to clean but they can very tiresome due to its many parts. Using the correct tools can make the job faster. Use a soft, long bristle brush and a can of compressed air to clean dirty air vents in no time.

Use the brush to wipe as much dust off the vent grill as possible. To give it that new look, just fire a few jets of air from a compressed air can on the grill and the job’s done.

Door Panels

In many vehicles, door panels are made of a single material or a combination of materials that are the same as the upholstery, the seats, dashboard or other parts of the vehicle interior. Whatever techniques and products were used on those areas can also be used on door panels.

Remember that many door panels have cup holders or open compartments and these can be some of the dirtiest areas inside your vehicle. Before cleaning with a chemical product, make sure to remove everything large enough by hand and vacuum the rest thoroughly.


Lingering odours inside a vehicle, particularly those caused by pets and cigarette smoke, can be tough to get rid of. Before you purchase any odour eliminating product, make sure that there is nothing that is causing the bad smell to be stuck or hidden in any place, nook or cranny, because even the best product cannot permanently get rid of bad odours if the source still remains.

If you’re certain that the odour is coming from the carpet or upholstery, use the odour eliminating product of your choice generously to get rid of the unpleasant smell. If you regularly travel with pets or smoke, odours are bound to return. Improve the smell in your vehicle by hanging a car deodorizer from the rearview mirror.

You can also use this trick: find an old plastic food storage container and make sure that it fits easily beneath your vehicle seat. Cut one-quarter inch slots into the lid and fill the container with ordinary lumps of charcoal. Secure the lid and slide the container under the car seat, making sure it’s hidden from view. The charcoal will help absorb bad smells and freshen the interior of your vehicle without the need for car deodorizers which can only mask nasty odours.

If you’re looking for a professional option for car detailing in Sri Lanka, NanoTuff is the ideal option for you. Our comprehensive and affordable detailing services coupled with one of the best jobs of nano ceramic coatings in Sri Lanka will ensure that your vehicle will look brand new both inside and out for years to come.


When it comes to professional car detailing in Sri Lanka, it can cost you quite a bit but doing it yourself is surprisingly easy on the wallet and easy for you too, with most of the tools and materials needed easily available in most homes.

If you have a decent vacuum cleaner and a variety of cleaning products, you already have the essentials needed for a good clean for your vehicle’s interior. Add in a mix of towels, rags, brushes, and sponges and you’re good to go. Here are two things that are essential to get you started:

1- A vacuum cleaner – A vacuum cleaner with an extension hose and hand-held attachments will be perfect. The attachments can easily be used to clean carpets and tight and hard-to-reach nooks. A steam cleaning machine can be useful too.

2- Chemical cleaning products – It’s likely that you already have the necessary products on hand to clean surfaces like plastic, carpeting, and vinyl. Note down the different surfaces of your vehicle and assemble products that are ideal for cleaning each surface of your vehicle.

Bear in mind that when using cleaning products on your vehicle’s interior you have to make sure that they are safe for a vehicle’s surface. If you’re doubtful, test on an inconspicuous area. If a blemish or a stain does show up, it will be hidden from view.

Now, let’s take a look at how to clean your vehicle’s interior like a pro:

Carpets and Floor Mats

This is a good place to start, seeing as carpets and floor mats tend to be the dirtiest part of a vehicle’s interior. However, if the cleanup of seats and the dashboard will create a bigger mess, make sure to clean the carpets at last so you will not have to redo it again.

Before you start, make sure to remove any coins, food wrappers, papers and other such junk that have accumulated. Slide the seats backward and forwards to make sure you haven’t missed any debris.

Remove the floor mats and vigorously shake them to get rid of dirt. Some floor mats have deep grooves to trap water and dirt can get caked between these indentations. If a good shake doesn’t get rid of all the dirt and grime, try loosening it with a stiff brush. Clean between the indentations with your vacuum cleaner’s bare hose nozzle.

Once the floor mats are free of dirt and grime, wash them with a strong jet of water from a garden hose and allow them to air-dry completely. If you have used a detergent to wash the floor mats, make sure to wash the cleaning product off thoroughly so that the mats are not slippery and unsafe during driving.

Once the carpets and floor mats are cleaned of dirt, the carpet needs to be vacuumed completely. Use the brush attachment and the other nozzles of different shapes and sizes to clean crevices and areas around the seats too.

The best way to wash any type of carpet is to use a steam cleaning machine, particularly hand-held models. If not, the variety of commercial carpet cleaning products will still work with the foam variety being the best option. With most products, you will need to spray it on and then brush it with a medium-stiff brush with extra effort for stain and problem areas. Make sure that you don’t get the carpet too wet as this can promote the growth of mildew and mold. If the carpet does become saturated, use a clean, absorbent towel to blot it dry. Stains that are difficult to remove may need an industrial-strength or specialized cleaning product. For chewing gum matted into the carpet, rub it with ice cubes for several minutes. When the gum turns brittle, gently pry it off the carpet.

Vehicle seats

There are three main types of materials used for vehicle seats and that is leather, vinyl, and cloth upholstery. Each material requires different cleaning methods. Before applying any cleaning compound, you will need to first give the seats and the area around and between them a thorough vacuuming to get as much dirt off as possible.

Leather seats

Leather seats can be luxurious but they have one big drawback: keeping leather clean and looking like new can be difficult. With time, dirt and grime get embedded into the leather surface, making lighter coloured leather look dingy. The good news is that a good leather cleaning product can take care of it easily.

Most leather cleaning products need to be sprayed or applied onto the seat and worked into the material by rubbing with a towel. If you’re using a towel, make sure to flip it often so that the cleaner side is constantly being used. Once that is done, dry the seats with a clean microfibre cloth. Then, allow the leather to dry thoroughly for a few hours. Then you can apply a leather conditioner to keep the material supple.

Vinyl seats

Compared to leather, vinyl is much easier to take are of cleanup is quick and straightforward and many products that you might already have will work on vinyl. Even some brands of glass cleaner will do a good job.

Make sure to go through the labels of the products you plan on using to identify one that is compatible with vinyl. Then, spray the vinyl seats with the cleaner and wipe it with a rag, making sure not to get the cleaner on any interior material. Then using a second rag, wipe down the seats completely and your vinyl seats should be ready to use in an hour or so.

Cloth seats

If you have cloth seats, ask yourself if there are any tough stains you have to take care of and if the seats need a general cleaning or if you also have to get rid of bad odors. These factors will determine the type of product or the method of cleaning to use.

A multi-purpose upholstery cleaner will work very well but if you have tough stains on the cloth seats, you may need a specialized stain remover. Depending on the products you use, you may also have to use a household odor elimination spray.

When dealing with cloth seats that are difficult to clean, be very careful. The more liquid cleaning products you use, the damper the seats will become. As a result, the fabric will soak up more moisture and will not dry easily, leaving your vehicle smelling musty.

To minimize the risk of harsh chemicals and the risk of wet car seats, just sprinkle some baking soda on the seats. After several hours, just vacuum the baking soda and your vehicle’s interior should smell nice and fresh. The longer you let the baking soda sit, the more odor it will absorb.

If you’re looking to save the hassle of cleaning your vehicle’s interior by looking for a professional option for car detailing in Sri Lanka, NanoTuff is the right option for you. Our services are efficient, satisfactory and, more importantly, will not break your bank.


While keeping the interior of a car clean and dirt-free is advantageous to both the eyes and noses of its passengers, a clean car interior is also much better for their health, as bacteria tend to build and collect inside unclean vehicle interiors.

Automotive professionals know that cleaning an entire car thoroughly can take several hours because there are a number of steps involved in doing so. In fact, the interior of a car alone could take an auto detailing in Sri Lanka more than an hour to clean. Every vehicle’s interior is made from different materials – ranging from fabric to leather – and knowing the proper methods, and using the right equipment and products is very important to help maintain it in the long run.

Leather should be handled with care

Auto detailing experts in Sri Lanka always say that a car’s leather interior should always be treated with the same care one would give his or her own skin. While it’s common knowledge that leather must be conditioned on a regular basis to protect against aging and cracking, auto detailing professionals go the extra step by understanding that vacuuming and a complete cleansing must come first before introducing a conditioning product.

Over the course of time, leather is more susceptible to the effects of environmental damage that is caused by dirt, oil and the sun’s UV rays. Here are three key steps auto detailing professionals will follow when cleaning leather of vehicle interiors:

  1. To use a microfiber cloth, along with a commercial cleaning solution to carefully wipe down all of the vehicle’s seats.
  2. To use a soft-bristle brush and a trusty cleaning solution to brush the seats meticulously to make sure that all of the dirt, dust, and grime comes to the surface of the leather.
  3. To wipe the seats down with a dry, clean microfiber cloth. Once this is done, the cloth is usually full of the dirt and residue that has accumulated on the leather.

Once cleansed, the leather is then conditioned. Leather conditioners are used to keep the material soft and pliable, protecting it from signs of aging and cracking for years to come. Thereafter, a pH neutral conditioner is applied to the car’s seats using a fresh microfiber sponge. It’s then let it sit and absorb for an hour – usually in a dark environment. After the conditioner has soaked into the leather, auto body experts will buff the seats with a microfiber cloth using a circular motion.

Auto detailing experts don’t use lotion-based products on perforated leather as it can get stuck in the holes of the leather.

Cleaning and removing stains from fabric seats

Auto detailing professionals in Sri Lanka know that while cleaning leather seats can take a long time, cleaning fabric interiors can be a little more challenging as it requires more manual labour. This is chiefly because the fabric is more prone to visible stains than leather, and normally, such stains are hard to remove.

Of course, no matter the material of a vehicle’s interior, auto body experts will always vacuum before they begin cleansing the interior of the vehicle. If there are stains on the seats, they will use an upholstery cleaning agent to remove them.

After spraying a reliable cleaning product directly onto the stains, auto body pros will scrub them out intensely, wiping the product off with a soft cloth once the stains have been removed. Next, they will clean the rest of the fabric seats using the same product as well as a soft cloth. When all of the car’s fabric has been cleaned, the seats will be wiped down with a dry cloth and allowed to air dry.

Like Us