Nano ceramic coating in Sri Lanka is certainly super strong when it cures but it does need some routine maintenance and care. Listed below are some reasons why it’s important to get routine maintenance service to help extend the lifespan and enhance the brilliance of your car’s exterior in addition to some easy steps you can follow to maintain your ceramic car coating:
- Make sure to wash your car every two weeks
Whether you drive your car daily or keep it in the garage more often, it’s recommended that you wash your car every other week. Doing so will help in avoiding excessive build-up of contaminants. Even if you use a car cover for the vehicle, dust collects on that too and it can penetrate underneath in microscopic levels.
- Avoid washing your car in direct sunlight
Direct sunlight generates heat, which is not good at all for these professional coatings. To make sure that you get the best results for all your hard work, wash your vehicle in shade like inside the garage or even outdoors but never under direct sunlight.
It’s also a good idea to wash your vehicle in the early morning or early evening when the sun is at its lowest potency. This will also help avoid water spots, which is always an advantage.
- Use the two-bucket method of washing your car
The two-bucket washing method is proven to help avoid swirl marks and give the best possible wash results. For those you are in the dark about this method, it’s basically using one bucket for soaking your wash mitt and the other bucket is used to clean the wash mitt after you wash each section of your car.
The bucket with water for rinsing is filled with clean water and has grit guards and used to simply rinse off dirt and debris from the wash mitt after each individual application.
Remember, when you wash your vehicle with the two-bucket method, always wash from the top bottom and rinse each section as you finish.
- Make sure to use an automotive-specific car soap or shampoo
It’s always better to use a quality car wash or shampoo because these automotive specific-products do not have any harsh abrasives, vehicle agents or other such contaminants. You don’t need to go with products that have added wax or polish; just good quality car soaps and shampoos will work fine.
- Make sure to use separate wash buckets for mitts for your car wheels
Tires and wheels collect brake dust, which is basically microscopic bits of metal shavings. It only makes sense to not to use the same mitts you use to wash your car wheels because it’s certain to have tiny pieces of metal and if you use the same mitts to wash your car’s surface, it’s going to ruin your ceramic coated paint surface.
The importance of proper ceramic coating care
Ceramic coatings for vehicles are car care or paint coating products that are designed to clear out the imperfections on the surface of a car’s paint from a microscopic level. When ceramic coatings cure, they maintain a 9H hardness, which makes it stronger than the best clear coat.
For those who are not familiar with what 9H is, here’s the lowdown:
Contrary to popular belief, 9H on a protective paint voting does not refer to the Mohs hardness scale, which is a scientific rating of the hardness of minerals. The hardness of ceramic coatings is actually factored from the pencil scale, which is a variant of the OG Mohs scale. This scale’s highest rating is 9H and it’s equal to about a 6H rating on the Mohs mineral scale of hardness.
A good quality ceramic coating will completely cure to reach that 9H level within a few days, which is why it’s recommended to keep the vehicle indoors for a few days after application. Although the ceramic coating is an amazingly durable and strong paint protection product, it can wear out before its time due to a number of reasons.
If you think about it, ceramic coatings are like a clear coat on steroids and like the traditional paint clear coat, over-exposure to environmental conditions like UV rays and other aspects like dirt and debris, tree sap, road grime, bird droppings and bug guts can slowly deteriorate the ceramic coating’s microscopic layer.
While it will take some time to show noticeable deterioration, constant exposure to the elements without routine maintenance can prematurely wear out the ceramic coating, increase water spots and reduce its ability to self-clean.
What happens when ceramic car coatings lack proper maintenance?
The truth is that even the best ceramic car coatings are not bullet-proof and free from any sort of maintenance. Like with everything else, over time you’ll start to notice a few warning signs that the lack of maintenance is starting to take its toll. Here are some of the signs of ceramic car coating deterioration due to the lack of routine maintenance:
- Loss of shine
One of the best things about ceramic car coatings is the brilliant shine it offers. However if you neglect maintaining it, the protective layer will eventually thin out, which will gradually decrease the shine and luster of ceramic coatings.
- Reduced hydrophobic effect
If there’s one thing that car owners love, it’s that fact that water, mud, dirt and other such contaminants just literally slide off a surface that has been treated with ceramic coating. But if the vehicle is left unwashed or with too much exposure to harmful UV rays frequently, it will increase the surface energy and lessen the coating’s hydrophobic properties.
What is surface energy?
In simple terms, surface energy is how liquids react when in contact with a surface. Ceramic coatings help to reduce the surface energy on a clear coat paint surface of a car, which is why water, mud, and dirt slides off without sticking to the surface. But if the protective coating is covered with dirt and debris, the surface energy is heightened, which causes more dirt and debris to stick to the surface.
Eventually, all good things must come to an end and this is what will happen if you ignore maintaining your ceramic car coating. While it’s highly marketed as a product that reduces the need to wash your vehicle as often, it doesn’t mean that you never have to wash your vehicle again.
By failing to routinely maintain the coating, it’ll only cause debris to accumulate, causing the ceramic coating to wear off and eventually damage the paint surface of your car.
Don’t forget that it’s not recommended to take your ceramic coated vehicle to an automatic car wash. However, if that is your only option, make sure it’s a touchless wash and make sure to take the time to dry the vehicle with several microfiber towels afterward.
A ceramic car coating is really a smart investment for protecting your vehicle’s surface in the long run. By following some simple maintenance steps, you can significantly enhance the effectiveness and longevity of this incredible product.